 to keep the cable on tension. |
 new position of the spar |
 to get the backstay inside the hull |
 the drawing of the winch inside the hull fot the stays with worm and worm-wheel |
 making the mould for the lead bulb |
 |
 the bulb is in four compartments of 6 kg lead |
 |
 a one turn winch modify to a 8.5 turns winch |
 I place the 2 IQ-710BB winches for the backstays |
 modify HS-805MG to 8.5 turn winch with a 10 turn poti. |
 |
 modifie the 10 turn poti. the axis must be smaller and the hous 2mm shorter |
 |
 make a flat peace at the end of the axis and a plastic house to glue the poti into the house |
 place 2 resistors into the 2 wire's 2.2K ohm to make the 8.5 turns |
|
|
 the turning wheels for the Genoa and Yankee sail |
For comment, questions or suggestions
please use the contact form
Last changes made,
24-jan-2014